Our DECON KIT is designed to give you everything you need to remove all the grime and bonded contaminants from your paints surface including tar and iron partials.
our tar remover ensure paint is washed prior to use spray over the area where the tar is present allow to dwell and then wipe away, for bigger more stubborn bits apply again if needed. once you have treated the area rinse thoroughly if heavily contaminated we recommend washing again. we also advise care to be taken on sensitive finishes and smart repairs.
IRON AVENGER 500ml
our iron remover ensure paint has been washed to remove surface dirt and wasting product, we advise trying this on the rear and lower third to see if iron is present before just spraying the car and potential wasting product if it’s not needed. rinse well after use again if very heavily contaminated a wash isn’t going to hurt.
LIME LUBE 500ml
our clay lube this can be dilute 5/1 with ease to make it more cost effective, ensure panel is well lubricated before claying we recommend leave the panel wet after rinsing from the iron or tar stage. we also advise only claying when the paint is cool to touch to try and prevent the clay grabbing on the paint and potential marring the paint finish.
clay pad with a medium and a heavy grade pad.
FOR MORE HELP AND A STEP BY STEP PLEASE SEE OUR HOW TO SECTION.